Methods of water treatment in swimming pool

Aug 29, 2022

Leave a message

Methods of water treatment in swimming pool



Swimming in the swimming pool in summer is a good way to reduce heat. Usually, the newly built swimming pool cannot be used immediately after being injected with water. We need to do a good job in the water quality treatment of the swimming pool. Many people don't know much about the treatment methods of the water quality of the swimming pool. Next, I will briefly introduce the water quality treatment methods of the swimming pool.


1. What is the water treatment method of swimming pool

1. First, we fill the swimming pool with water, and then pour a certain amount of copper sulfate into the swimming pool according to a certain proportion. After standing for 24 hours, we add disinfectant to the swimming pool. When adding disinfectant, turn on the circulating pump of the swimming pool and spray the disinfectant evenly. After standing for 2 hours, we are checking whether the residual chlorine in the swimming pool water meets the standard. If the residual chlorine is less than 0.5ppm, we need to add an appropriate amount of disinfectant.

a57e3c523342dbd09cfe86e57328bc51_28860649


2. Next we pour sodium carbonate into the swimming pool to adjust the pH of the water. If the water in the swimming pool is turbid, the polyaluminum can be diluted. When the circulating pump of the swimming pool is turned on, spray the medicine evenly. After 2 hours, turn off the circulating pump and leave it for 8 hours. Finally, we added water stabilizer to keep the water quality of the swimming pool stable. Water stabilizer can be added 1-2 times a month.

9744ee0a3a8a391ae7315a805c9eb1d5_28860653


2. What should we pay attention to when dealing with the water quality of the swimming pool

When we deal with the water quality of the swimming pool, we can't pour copper sulfate and disinfectant, or disinfectant and alkali into the pool at the same time to save time. If disinfectant and alkali are added at the same time, the disinfection effect of the pool water will be affected. We are adding polyaluminum precipitates to remove the dirty substances in the pool water. We must first adjust the pH value of the pool water, otherwise the water quality will deteriorate. The dirty dirt in the pool water shall be cleaned in time after sedimentation.

2bc9af6b440dc14078b285a923b95d64_28860646



Send Inquiry