How to make the RGB rainbow swimming pool underwater lights synchronize and change the effect? Usually, the factory default design is to automatically control the synchronization of lighting effects through program control when powered on. To achieve synchronous change effects with more intelligent and diverse control methods, it is necessary to meet some basic conditions, such as installation wiring, signal transmission controller, voltage guarantee, etc. The following is a detailed introduction:
1. Install wiring. Whether it is automatic program control or intelligent control, in order to achieve synchronization effect, all underwater lights in the swimming pool must be connected to the same switch for installation and wiring. Attention should be paid to connecting AC to the transformer and DC to the power supply, converting 220V voltage to 12V/24V low voltage.
2. Controller signal transmission. To control the RGB synchronization effect of swimming pool underwater lights through a remote control or mobile app, a signal controller is required. Built in antenna, connected to the controller through remote control and mobile app for signal transmission, enabling remote control of open areas within 30 meters.
3. Voltage guarantee. Provide stable voltage for underwater pool lights to avoid inconsistent brightness or color due to voltage fluctuations. It is recommended that the total length of the power cord connected in series with the AC transformer/DC power supply should not exceed 30 meters, and the total power voltage of all underwater lamps should not exceed the power of the transformer/power supply.
The default power on automatic program synchronization effect of RGB rainbow underwater pool lights is the simplest and lowest cost budget, suitable for small swimming pools with low requirements; The synchronization effect of remote control and mobile app control is the most convenient, with the most modes and relatively high cost budget, suitable for large swimming pools, water parks, and so on.
