How to choose the colorful lights for the fountain
1. Power:
Colored lights are an auxiliary device for fountains. Fountain underwater color lamp is generally divided into ordinary incandescent lamp and high-pressure Gas-discharge lamp. Generally, lower voltage colored lights are used for fountains, with a power of 1-72W.
All adopt imported 1W high-power LED as the light source, with significant advantages such as long lifespan, low power consumption, pure color, and no pollution. Cooperating with the dmx512 control system can achieve various color change effects. Can work underwater for a long time, with a protection level of up to IP68; Using low-voltage AC or DC power supply, safe and reliable, with a stainless steel shell, beautiful and elegant, safe and reliable.
Colored lights are an auxiliary device for fountains. Selecting underwater colored lights around the nozzle in the fountain can form a colorful fountain. At night, the colorful lights in the fountain glow, setting off the magnificent and elegant water scenery of the fountain. Controlled by the program, the colored lights equipped with flashing controllers also change rhythmically with the fountain, adding a lively and ever-changing landscape. Therefore, colored lights and Musical fountain are very popular.
2. Environmental protection:
Compared to traditional underwater lights, fountain colored lights are more energy-efficient and environmentally friendly, with diverse lighting and stronger decorative properties, making them widely used in various landscape lighting systems. However, as a manufacturer of LED lighting fixtures, there are some issues that require special attention in the installation of LED fountain underwater lights. Before installing the LED fountain underwater light, the power must be cut off first. This is the step for installing all electrical equipment and the foundation for safe operation. To improve the heat dissipation of LED fountain underwater lights, it is recommended to place the lights below the water surface for use. In order to achieve good waterproof effect for LED fountain underwater lights, the protective effect of LED fountain underwater lights should reach IP67 or above, and the lights can be placed below 5 meters above the water surface.
Fix the installation position of the LED fountain underwater lamp. The chassis can be fixed with screws. The wiring terminal of a general underwater fountain lamp is located on the water surface, and waterproof treatment should be done at the power connection. The control system is designed by engineers to achieve a maximum LED lifespan under normal working conditions and typical color change effects after use. Prolonged operation beyond these ranges or conditions or at the upper limit of these conditions will further reduce the lifespan of the LED, and in extreme cases, internal light source components may malfunction. When installing lighting fixtures, please handle them gently to avoid damaging them.
Various types of prisms can be pressed on the protective glass surface. The light emitted by the light source is reflected by the reflector, reaches the prism, and then distributed, so that the intensity of the light meets the requirements of different fountain patterns. Easy installation and low maintenance costs. This product can also be directly installed on various underwater lights, making it an ideal choice for landscape lighting such as fountains and pools. Our company produces LED underwater lights in various specifications, colors, and shapes to choose from. The color changing methods can include gradient, skip, skip gradient, and monochrome functions.
3. Voltage
The PAR type bulb is colorless and is installed in the outer shell of the lamp. The lamp housing consists of a metal frame and an outer cover. The outer cover is made of heat-resistant glass of different colors. The heat-resistant glass is sealed with a rubber ring between the shell. There are five colors of glass: red, yellow, green, blue, and transparent, with the transparency of yellow and transparent glass. There are two types of light bulbs: narrow beam and wide beam, which are selected according to the pattern of the fountain. The advantage of this type of lamp is that it is made of pressed colored glass, with high mechanical strength, not easily broken, and reliable sealing; In addition, the projection angle of the lamp can be adjusted, and it can rotate 360 ° in the horizontal direction, and can rotate up and down within 180 ° in the vertical direction. At present, there are two types of sealed lamps produced in China: rated voltage below 36V and rated voltage below 220V. Generally, lower Voltage colored lights are used for fountains, with a power of 1-72W.
Compared to traditional underwater lights, fountain colored lights are more energy-efficient and environmentally friendly, with diverse lighting and stronger decorative properties, making them widely used in various landscape lighting systems. However, as a manufacturer of LED lighting fixtures, there are some issues that require special attention in the installation of LED fountain underwater lights. Before installing the LED fountain underwater light, the power must be cut off first. This is the step for installing all electrical equipment and the foundation for safe operation. To improve the heat dissipation of LED fountain underwater lights, it is recommended to place the lights below the water surface for use. In order to achieve good waterproof effect for LED fountain underwater lights, the protective effect of LED fountain underwater lights should reach IP67 or above, and the lights can be placed below 5 meters above the water surface.
The use of red, green, and blue three primary color LED mixing produces a seven color effect, which can meet the requirements of different lighting colors in different occasions. Pure color, uniform luminescence, strong ability to penetrate smoke and mist. Can be clearly seen in thick smoke or fog. It is incomparable to any other light source. Long lifespan, with an average lifespan of 80000-100000 hours. Directly connected to the power supply, it can automatically change color. Easy installation and low maintenance costs. This product can also be directly installed on various underwater lights, making it an ideal choice for landscape lighting such as fountains and pools. Our company produces LED underwater lights in various specifications, colors, and shapes to choose from. The color changing methods can include gradient, skip, skip gradient, and monochrome functions.
All adopt imported 1W high-power LED as the light source, with significant advantages such as long lifespan, low power consumption, pure color, and no pollution. Cooperating with the dmx512 control system can achieve various color change effects. Can work underwater for a long time, with a protection level of up to IP68; Using low-voltage DC power supply, safe and reliable, with a stainless copper shell, beautiful and elegant, safe and reliable.
