Stainless Steel Junction Box For Underwater Lights
Description
Stainless Steel Junction Box for Underwater Lights
1. Use junction boxes listed and labeled for the intended use if using one to connect wires from underwater lights to wires from a panelboard. Size the box to comply with the box contents limitation in Section 3905.
2. Connect all metal conduit and grounding terminals to the junction box so that all metal is bonded together.
3. Locate junction boxes at least (≥) 4 inches above ground or pool deck level or at least (≥) 8 inches above maximum water level, whichever provides the higher elevation, and at least (≥) 4 feet from the pool or spa inside wall. Do not locate junction boxes in walkways unless they are protected by a fixed structure such as a diving board or a fixed-in-place box.
4. You may use deck mounted junction boxes for lights operating at low voltage if an approved potting compound fills the box to prevent moisture entry and if the box is located at least (≥) 4 feet from the pool or spa inside wall.
Spec |
|
Decription | Waterproof standard | box size(mm) |
1→1 |
|
1→1(Φ8 or Φ12), (S.S304) | IP68 | Φ85 x 40 |
1→2 | 1→2(Φ8 or Φ12), (S.S304) | IP68 | Φ85 x 40 | |
1→3 | 1→3(Φ8 or Φ12(only 2)), (S.S304) | IP68 | Φ85 x 40 | |
1→3 |
|
1→3(Φ8 or Φ12 or Φ14 (only 1)), (S.S304) | IP68 | Φ115 x 55 |
1→4 | 1→4(Φ8 or Φ12or Φ14 (only 1)), (S.S304) | IP68 | Φ115 x 55 | |
1→5 | 1→5(Φ8 or Φ12 or Φ14 (only 2)), (S.S304) | IP68 | Φ115 x 55 | |
1→5 |
|
1→5(Φ8 or Φ12or Φ14 (only 2)), (S.S304) | IP68 | Φ115 x 55 |
1→6 | 1→6(Φ8 or Φ12or Φ14 (only 2)), (S.S304) | IP68 | Φ145 x 60 | |
1→7 | 1→7(Φ8 or Φ12or Φ14 (only 2)),(S.S304) | IP68 | Φ145 x 60 | |
1→8 | 1→8(Φ8 or Φ12or Φ14 (only 2)), (S.S304) | IP68 | Φ145 x 60 | |
1→9 | 1→9(Φ8 or Φ12or Φ14 (only 2)), (S.S304) | IP68 | Φ145 x 60 | |
1→6 |
|
1→6(Φ22 ), (S.S304) | IP68 | Φ175 x100 |
1→6 | 1→6(Φ18 ), (S.S304) | IP68 | Φ175 x100 | |
1→10 | 1→10(Φ14 ), (S.S304) | IP68 | Φ175 x100 |